1098 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
CLEAR
ARP SECURITY STATISTICS
clear arp security statistics
Overview Use this command to clear ARP security statistics for the specified ports, or for all
ports.
Syntax
clear arp security statistics [interface <port-list>]
Mode Privileged Exec
Example To clear statistics for ARP security on interface port1.0.1, use the command:
awplus# clear arp security statistics interface port1.0.1
Related
Commands
arp security violation
show arp security
show arp security statistics
Parameter Description
<port-list> The ports to clear statistics for. If no ports are specified, statistics are
cleared for all ports. The ports may be switch ports, or static or
dynamic link aggregators.
To Next Page
Loading...
