Allied Telesis AlliedWare Plus AT-x230-10GP - Group

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1019
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
GROUP
group
Overview Use this command to create a local RADIUS server user group, and enter local
RADIUS Server User Group Configuration mode.
Use the no variant of this command to delete the local RADIUS server user group.
Syntax
group <user-group-name>
no group <user-group-name>
Mode RADIUS Server Configuration
Examples The following command creates the user group NormalUsers.
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group NormalUsers
The following command deletes user group NormalUsers.
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# no group NormalUsers
Related
Commands
user (RADIUS server)
show radius local-server user
vlan (RADIUS server)
Parameter Description
<user-group-name> User group name string.