EasyManuals Logo

Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

Allied Telesis AlliedWare Plus AT-x230-10GP
1536 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1485 background imageLoading...
Page #1485 background image
C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1485
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
TRIGGER COMMANDS
TYPE
TIME
type time
Overview This command configures a trigger that activates at a specified time of day.
Syntax
type time <hh:mm>
Mode Trigger Configuration
Usage A combined limit of 10 triggers of the type time and type periodic can be
configured. If you attempt to add more than 10 triggers the following error
message is displayed:
Example To configure trigger 86 to activate at 15:53, use the following commands:
awplus# configure terminal
awplus(config)# trigger 86
awplus(config-trigger)# type time 15:53
Related
Commands
show trigger
trigger
Parameter Description
<hh:mm> The time to activate the trigger.
% Cannot configure more than 10 triggers with the type time or
periodic

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AlliedWare Plus AT-x230-10GP and is the answer not in the manual?

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General IconGeneral
BrandAllied Telesis
ModelAlliedWare Plus AT-x230-10GP
CategorySwitch
LanguageEnglish

Related product manuals