Allied Telesis AlliedWare Plus AT-x230-10GP - Show Debugging Loopprot

344 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SWITCHING COMMANDS
SHOW
DEBUGGING LOOPPROT
show debugging loopprot
Overview This command shows Loop Protection debugging information.
Syntax
show debugging loopprot
Mode User Exec and Privileged Exec
Example To display the enabled Loop Protection debugging modes, use the command:
awplus# show debugging loopprot
Related
Commands
debug loopprot