358 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SWITCHING COMMANDS
SHOW
PLATFORM PORT
show platform port
Overview This command displays the various port registers or platform counters for
specified switchports.
Syntax
show platform port [<port-list>|counters]
Mode Privileged Exec
Examples To display port registers for port1.0.1 and port1.0.2 use the following
command:
awplus# show platform port port1.0.1-port1.0.2
To display platform counters for port1.0.1 and port1.0.2 use the following
command:
awplus# show platform port port1.0.1-port1.0.2 counters
Parameter Description
<port-list> The ports to display information about. A port-list can be:
• a continuous range of ports separated by a hyphen, e.g.
port1.0.1-1.0.6
• a comma-separated list of ports and port ranges, e.g.
port1.0.1,port1.0.4-1.0.6.
counters Show the platform counters.
To Next Page
Loading...
