C613-50055-01 REV A Command Reference for x230 Series Edge Switches 757
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV6 SOFTWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
IPV6 ACCESS-LIST (IPV6 SOFTWARE ACLS)
show ipv6 access-list (IPv6 Software ACLs)
Overview Use the show ipv6 access-list standard command to display a specified standard
named IPv6 access-list that has been defined using the ipv6 access-list standard
(named) command.
Syntax
show ipv6 access-list standard <access-list-name>
Mode User Exec and Privileged Exec
Example To show the ipv6 access-list specified with the name acl_name use the following
command:
awplus# show ipv6 access-list standard acl_name
Output Figure 23-1: Example output from the show ipv6 access-list standard command
Related
Commands
ipv6 access-list standard (named)
(ipv6 access-list standard filter)
Parameter Description
standard Named standard access-list.
<access-list-name> Specify an IPv6 access-list name.
Named Standard IPv6 access-list name
deny any
To Next Page
Loading...
Need help?
General
