802 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
QOS COMMANDS
SHOW
MLS QOS MAPS PREMARK-DSCP
show mls qos maps premark-dscp
Overview This command displays the premark-dscp map. This map is used when the trust
dscp command has been specified for a policy-map’s class-map to replace the
DSCP, CoS and/or bandwidth class of a packet matching the class-map based on a
lookup DSCP value.
Syntax
show mls qos maps premark-dscp [<0-63>]
Mode User Exec and Privileged Exec
Example To display the premark-dscp map for DSCP 1, use the command:
awplus# show mls qos maps premark-dscp 1
Output Figure 24-8: Example output from the show mls qos maps premark-dscp
command
Related
Commands
mls qos map premark-dscp to
trust dscp
Parameter Description
<0-63> DSCP table entry.
PREMARK-DSCP-MAP:
DSCP 1
Bandwidth Class
-------------------------
New DSCP 2
New CoS 0
New Bandwidth Class green
To Next Page
Loading...
