C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1293
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
MANAGEMENT STACKING COMMANDS
MSTACK
ENABLE
mstack enable
Overview This command manually enables (turns on) the management stacking feature for
the switch being configured.
Use the no variant of this command to disable (turn off) the management stacking
feature on the node.
Syntax
mstack enable
no mstack enable
Mode Global Configuration
Usage To use management stacking you need to enable management stacking on each
switch in the management stack.
Examples To turn on the management stacking feature:
MyNode# config terminal
MyNode(config)# mstack enable
To turn off the management stacking feature:
MyNode(config)# no mstack enable
To Next Page
Loading...
