1274 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF COMMANDS
SHOW
ATMF NODES
show atmf nodes
Overview This command displays all nodes currently configured within the AMF network. It
displays a topographical representation of the network infrastructure.
This command displays a summary of all virtual links currently in the running
configuration.
Syntax
show atmf nodes
Mode Privileged Exec
Example To display AMF information for all nodes in the AMF, use the command:
node_1# show atmf nodes
Table 35-25: Sample output from the show atmf nodes command.
node1#show atmf nodes
Node Information:
* = Local device
SC = Switch Configuration:
C = Chassis S = Stackable N = Standalone
Node Device ATMF Node
Name Type Master SC Parent Depth
--------------------------------------------------------------------------------
Building_1 AT-SBx8112 Y C - 0
* Bld1_Floor_1 SwitchBlade x908 N S Building_1 1
Bld1_Floor_2 x600-24Ts/XP N N Building_1 1
Bld2_Floor_1 x610-24Ts-POE+ N N Building_1 1
SW_Team1 x210-24GT N N Bld1_Floor_2 2
Current ATMF node count 6
To Next Page
Loading...
