C613-50055-01 REV A Command Reference for x230 Series Edge Switches 293
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
INTERFACE COMMANDS
DESCRIPTION
(INTERFACE)
description (interface)
Overview Use this command to add a description to a specific port or interface.
Syntax
description <description>
Mode Interface Configuration
Example The following example uses this command to describe the device that a switch
port is connected to.
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# description Boardroom PC
Parameter Description
<description> Text describing the specific interface.
To Next Page
Loading...
