Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

256 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOGGING COMMANDS
LOG
EMAIL
log email
Overview This command configures the device to send log messages to an email address.
The email address is specified in this command.
Syntax
log email <email-address>
Default By default no filters are defined for email log targets. Filters must be defined before
messages will be sent.
Mode Global Configuration
Example To have log messages emailed to the email address
admin@alliedtelesis.com use the following commands:
awplus# configure terminal
awplus(config)# log email admin@alliedtelesis.com
Validation
Commands
show log config
Related
Commands
default log email
log email
Parameter Description
<email-address> The email address to send log messages to

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English