Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 6: Logging Commands; Logging Commands; Introduction

6
235 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Logging Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
logging.
Command List •“clear exception log” on page 237
•“clear log” on page 238
•“clear log buffered” on page 239
•“clear log permanent” on page 240
•“default log buffered” on page 241
•“default log console” on page 242
•“default log email” on page 243
•“default log host” on page 244
•“default log monitor” on page 245
•“default log permanent” on page 246
•“log buffered” on page 247
•“log buffered (filter)” on page 248
•“log buffered size” on page 251
•“log console” on page 252
•“log console (filter)” on page 253
•“log email” on page 256
•“log email (filter)” on page 257
•“log email time” on page 260
•“log host” on page 262
•“log host (filter)” on page 263