Allied Telesis AlliedWare Plus AT-x230-10GP - Show Crypto Pki Certificates User

1028 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
SHOW
CRYPTO PKI CERTIFICATES USER
show crypto pki certificates user
Overview Use this command to display certificate information for a specified local RADIUS
server user.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show crypto pki certificates user [<user-name>]
Mode User Exec and Privileged Exec
Example The following command displays Tom’s certificate information.
awplus# show crypto pki certificates user Tom
Output
Parameter Description
<user-name> User name.
Table 29-5: Example output from the show crypto pki certificates user
command to show certificate information for user Tom
awplus#show crypto pki certificates user Tom
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 2 (0x2)
Signature Algorithm: sha1WithRSAEncryption
Issuer: O=Allied-Telesis, CN=AlliedwarePlusCA
Validity
Not Before: Oct 8 07:50:55 2009 GMT
Not After : Oct 6 07:50:55 2019 GMT
Subject: O=Allied-Telesis, CN=Tom
Table 29-6: Parameters in the output of the show crypto pki certificates user
command
Parameter Description
Certificate Certificate name.
Version Protocol version.
Serial Number Serial number of the certificate.
Signature
Algorithm
Algorithm used for the certificate signature.