EasyManua.ls Logo

Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 24: Qos Commands; Introduction

Allied Telesis AlliedWare Plus AT-x230-10GP
1536 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
758 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
QoS Commands
Introduction
Overview This chapter provides an alphabetical reference for Quality of Service commands.
For more information, see the QoS Feature Overview and Configuration Guide and
the ACL Feature Overview and Configuration Guide.
Command List •“class” on page 760
•“class-map” on page 761
•“clear mls qos interface policer-counters” on page 762
•“default-action” on page 763
•“description (QoS policy-map)” on page 764
•“egress-rate-limit” on page 765
•“match access-group” on page 766
•“match cos” on page 768
•“match dscp” on page 769
•“match eth-format protocol” on page 770
•“match ip-precedence” on page 773
•“match mac-type” on page 774
•“match tcp-flags” on page 775
•“match vlan” on page 776
•“mls qos cos” on page 777
•“mls qos enable” on page 778
•“mls qos map cos-queue to” on page 779
•“mls qos map premark-dscp to” on page 780
•“no police” on page 782

Table of Contents

Related product manuals