Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 17: Static Routing Commands for Management Purposes; Introduction

17
591 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Static Routing
Commands for
Management
Purposes
Introduction
Overview This chapter provides an alphabetical reference of static routing commands that
are used to direct management packets to appropriate VLANs.
Command List •“ip route” on page 592
•“show ip route” on page 593
•“show ip route database” on page 595
•“show ip route summary” on page 596