498 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LINK AGGREGATION COMMANDS
SHOW
LACP SYS-ID
show lacp sys-id
Overview Use this command to display the LACP system ID and priority.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show lacp sys-id
Mode User Exec and Privileged Exec
Example
awplus# show lacp sys-id
Output Figure 13-5: Example output from the show lacp sys-id command
System Priority: 0x8000 (32768)
MAC Address: 0200.0034.5684
To Next Page
Loading...
Need help?
General
