602 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
MULTICAST COMMANDS
CLEAR
IPV6 MROUTE STATISTICS
clear ipv6 mroute statistics
Overview Use this command to delete multicast route statistics entries from the IPv6
multicast routing table.
NOTE: Static IPv6 multicast routes take priority over dynamic IPv6 multicast routes. Use
the clear ipv6 mroute command to clear static IPv6 multicast routes and ensure
dynamic IPv6 multicast routes can take over from previous static IPv6 multicast routes.
Syntax
clear ipv6 mroute statistics {*|<ipv6-group-address>
[<ipv6-source-address>]}
Mode Privileged Exec
Examples
awplus# clear ipv6 mroute statistics 2001::2 ff08::1
awplus# clear ipv6 mroute statistics *
Parameter Description
* All multicast route entries.
<ipv6-group-addr> Group IPv6 address, in hexadecimal notation in the
format X.X::X.X.
<ipv6-source-addr> Source IPv6 address, in hexadecimal notation in
the format X.X::X.X.
To Next Page
Loading...
