C613-50055-01 REV A Command Reference for x230 Series Edge Switches 167
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LICENSING COMMANDS
SHOW
LICENSE
show license
Overview This command displays information about a specific software feature license, or all
enabled software feature licenses on the device.
Syntax
show license [feature] [<label>|index <index-number>]
Mode User Exec and Privileged Exec
Examples To display full information about all enabled licenses, use the command:
awplus# show license
To display full information about the licenses with index number 1, use the
command:
awplus# show license index 1
Parameter Description
feature Only display license information for any applied feature licenses.
<label> The license name of the software featureto show information
about. Thelicense name can be used instead of the index number
to identify a specific license.
index
<index-number>
The index number of the software feature license to show
information about. The index number can be used instead of the
license name to identify a specific license.
Table 4-1: Parameters in the output of the show license command
Parameter Description
Board region Name of the region for the Base License features.
Index Index identifying entry. The index is assigned
automatically by the software. It is not configured.
License name Name of the license key bundle (case-sensitive).
Customer name Customer name.
Quantity of licenses Quantity of licensed installations.
Type of license Full or Trial.
License issue date Date the license was generated.
License expiry date Expiry date for trial license.
Features included List of features included in the feature license.
To Next Page
Loading...
