Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 44: Trigger Commands; Trigger Commands; Introduction

To Next Page

To Previous Page

1452 Command Reference for x230 Series Edge Switches C613-50055-01 REV A

AlliedWare Plus™ Operating System - Version 5.4.5-0.x

Trigger Commands

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure

Triggers. For more information, see the Triggers Feature Overview and

Configuration Guide.

For information on filtering and saving command output, see “Controlling “show”

Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview

and Configuration Guide.

Command List •“active (trigger)” on page 1454

•“day” on page 1455

•“debug trigger” on page 1457

•“description (trigger)” on page 1458

•“repeat” on page 1459

•“script” on page 1460

•“show debugging trigger” on page 1462

•“show running-config trigger” on page 1463

•“show trigger” on page 1464

•“test” on page 1469

•“time (trigger)” on page 1470

•“trap” on page 1472

•“trigger” on page 1473

•“trigger activate” on page 1474

•“type atmf node” on page 1475

•“type card” on page 1478

•“type cpu” on page 1479

Related product manuals