C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1445
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
RMON COMMANDS
SHOW
RMON ALARM
show rmon alarm
Overview Use this command to display the alarms and threshold configured for the RMON
probe.
NOTE: Only the alarms for switch port interfaces, not for VLAN interfaces, can be shown.
Syntax
show rmon alarm
Mode User Exec and Privileged Exec
Example To display the alarms and threshold, use this command:
awplus# show rmon alarm
Related
Commands
rmon alarm
To Next Page
Loading...
