C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1463
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
TRIGGER COMMANDS
SHOW
RUNNING-CONFIG TRIGGER
show running-config trigger
Overview This command displays the current running configuration of the trigger utility.
Syntax
show running-config trigger
Mode Privileged Exec
Example To display the current configuration of the trigger utility, use the command:
awplus# show running-config trigger
Output Figure 44-2: Example output from the show running-config trigger command
Related
Commands
show trigger
trigger 1
type card in
trigger 2
type card out
!
To Next Page
Loading...
