C613-50055-01 REV A Command Reference for x230 Series Edge Switches 251
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOGGING COMMANDS
LOG
BUFFERED SIZE
log buffered size
Overview This command configures the amount of memory that the buffered log is
permitted to use. Once this memory allocation has been filled old messages will be
deleted to make room for new messages.
Syntax
log buffered size <50-250>
Mode Global Configuration
Example To allow the buffered log to use up to 100 kB of RAM use the following commands:
awplus# configure terminal
awplus(config)# log buffered size 100
Validation
Commands
show log config
Related
Commands
default log buffered
log buffered
Parameter Description
<50-250> Size of the RAM log in kilobytes
To Next Page
Loading...
Need help?
General
