Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 47 Cable Fault Locator Commands; Introduction

47
1533 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Cable Fault Locator
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to test copper
cables. For more information on running the CFL, see the “Cable Fault Locator”
Feature Overview and Configuration Guide.
Command List •“clear test cable-diagnostics tdr” on page 1534
•“show test cable-diagnostics tdr” on page 1535
•“test cable-diagnostics tdr interface” on page 1536