650 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
MLD SNOOPING COMMANDS
CLEAR
IPV6 MLD GROUP
clear ipv6 mld group
Overview Use this command to clear MLD specific local-membership(s) on all interfaces, for
a particular group.
Syntax
clear ipv6 mld group {*|<ipv6-address>}
Mode Privileged Exec
Example
awplus# clear ipv6 mld group *
Related
Commands
clear ipv6 mld
clear ipv6 mld interface
Parameter Description
* Clears all groups on all interfaces. This is an alias to the clear
ipv6 mld command.
<ipv6-address> Specify the group address for which MLD local-memberships
are to be cleared from all interfaces.
Specify the IPv6 multicast group address in the format in the
format X:X::X:X.
To Next Page
Loading...
