C613-50055-01 REV A Command Reference for x230 Series Edge Switches 965
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AAA COMMANDS
AAA
GROUP SERVER
aaa group server
Overview This command configures a RADIUS server group. A server group can be used to
specify a subset of RADIUS servers in aaa commands. The group name radius is
predefined, which includes all RADIUS servers configured by the radius-server
host command.
RADIUS servers are added to a server group using the server command. Each
RADIUS server should be configured using the radius-server host command.
Use the no variant of this command to remove an existing RADIUS server group.
Syntax
aaa group server radius <group-name>
no aaa group server radius <group-name>
Mode Global Configuration
Usage Use this command to create an AAA group of RADIUS servers, and to enter Server
Group Configuration mode, in which you can add servers to the group. Use a server
group to specify a subset of RADIUS servers in AAA commands. Each RADIUS server
must be configured by the radius-server host command. To add RADIUS servers
to a server group, use the server command.
Examples To create a RADIUS server group named GROUP1 with hosts 192.168.1.1,
192.168.2.1 and 192.168.3.1, use the commands:
awplus(config)# aaa group server radius GROUP1
awplus(config-sg)# server 192.168.1.1 auth-port 1812 acct-port
1813
awplus(config-sg)# server 192.168.2.1 auth-port 1812 acct-port
1813
awplus(config-sg)# server 192.168.3.1 auth-port 1812 acct-port
1813
To remove a RADIUS server group named GROUP1 from the configuration, use the
command:
awplus(config)# no aaa group server radius GROUP1
Parameter Description
<group-name> Server group name.
To Next Page
Loading...
Need help?
General
