Allied Telesis AlliedWare Plus AT-x230-10GP - Show Mstack Nodes

1296 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
MANAGEMENT STACKING COMMANDS
SHOW
MSTACK NODES
show mstack nodes
Overview This command displays all nodes currently configured within the management
stacking network.
Syntax
show mstack nodes
Mode Privileged Exec
Example To display management stacking information for all nodes in the management
stack, use the command:
command-node# show mstack nodes
Figure 36-1: Sample output from the show mstack nodes command.
Node Information:
* = Local device
SC = Switch Configuration:
C = Chassis S = Stackable N = Standalone
Node Device MSTACK
Node Name Type C-Node SC Parent Depth
-----------------------------------------------------------------
command-node x230-10GP Y N none 0
node-01 x230-10GP N N command-node 1
* node-02 x230-10GP N N node-01 2
Current MSTACK node count 3