2
65 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
User Access
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
user access.
Command List •“clear line console” on page 67
•“clear line vty” on page 68
•“enable password” on page 69
•“enable secret” on page 72
•“exec-timeout” on page 75
•“flowcontrol hardware (asyn/console)” on page 77
•“length (asyn)” on page 79
•“line” on page 80
•“privilege level” on page 82
•“security-password history” on page 83
•“security-password forced-change” on page 84
•“security-password lifetime” on page 85
•“security-password minimum-categories” on page 86
•“security-password minimum-length” on page 87
•“security-password reject-expired-pwd” on page 88
•“security-password warning” on page 89
•“service advanced-vty” on page 90
•“service http” on page 91
•“service password-encryption” on page 92
•“service telnet” on page 93
To Next Page
Loading...
