C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1173
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AMF COMMANDS
ATMF
BACKUP AREA-MASTERS NOW
atmf backup area-masters now
Overview Use this command to run a backup of one or more remote area-masters from the
AMF controller immediately. This command is only valid on AMF controllers.
Syntax
atmf backup area-masters now [area <area-name>|area <area-name>
node <node-name>]
Mode Privileged Exec
Example To back up all local master nodes in all areas controlled by controller-1, use the
command
controller-1# atmf backup area-masters now
To back up all local masters in the Wellington area, use the command
controller-1# atmf backup area-masters now area Wellington
To back up the local master “well-master” in the Wellington area, use the
command
controller-1# atmf backup area-masters now area Wellington node
well-master
Related
Commands
atmf backup area-masters enable
atmf backup area-masters synchronize
show atmf backup area
Parameter Description
<area-name> The area whose area-masters will be backed up.
<node-name> The node that will be backed up.
To Next Page
Loading...
