Allied Telesis AlliedWare Plus AT-x230-10GP - Type Card

1478 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
TRIGGER COMMANDS
TYPE
CARD
type card
Overview Use this command to configure a trigger that activates on either the removal or the
insertion of a Secure Digital (SD) or Secure Digital High Capacity (SDHC) card.
Syntax
type card {in|out}
Mode Trigger Configuration
Usage Card triggers cannot execute script files from a card.
In a VCStack configuration, card triggers are activated on the master for either the
insertion or removal of a card on the master only.
For example trigger configurations that use the type card command, see “Capture
Show Output and Save to an SD Card” in the Triggers Feature Overview and
Configuration Guide.
Examples To configure trigger 1 to activate on the insertion of a card, use the commands:
awplus# configure terminal
awplus(config)# trigger 1
awplus(config-trigger)# type card in
Related
Commands
trigger
show running-config trigger
show trigger
Parameter Description
in Trigger activates on insertion of a card.
out Trigger activates on removal of a card.