1128 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING BINDING
show ip dhcp snooping binding
Overview Use this command to display all dynamic and static entries in the DHCP snooping
binding database.
Syntax
show ip dhcp snooping binding
Mode User Exec and Privileged Exec
Example To display entries in the DHCP snooping database, use the command:
awplus# show ip dhcp snooping binding
Table 32-14: Example output from the show ip dhcp snooping binding command
awplus# show ip dhcp snooping binding
DHCP Snooping Bindings:
Client MAC Server Expires
IP Address Address IP Address VLAN Port (sec) Type
-------------------------------------------------------------------------------
1.2.3.4 aaaa.bbbb.cccc -- 7 1.0.6 Infinite Stat
1.2.3.6 any -- 4077 1.0.6 Infinite Stat
1.3.4.5 any -- 1 sa1 Infinite Stat
111.111.100.101 0000.0000.0001 111.112.1.1 1 1.0.6 4076 Dyna
111.111.101.108 0000.0000.0108 111.112.1.1 1 1.0.6 4084 Dyna
111.111.101.109 0000.0000.0109 111.112.1.1 1 1.0.6 4085 Dyna
111.211.100.101 -- -- 1 1.0.2 2147483325 Dyna
111.211.100.109 00b0.0000.0009 111.112.111.111 1 1.0.2 21 Dyna
111.211.101.101 00b0.0000.0101 111.112.111.111 1 1.0.2 214 Dyna
Total number of bindings in database: 9
Table 32-15: Parameters in the output from the show ip dhcp snooping binding
command
Parameter Description
Client IP The IP address of the DHCP client.
MAC Address The MAC address of the DHCP client.
Server IP The IP address of the DHCP server.
VLAN The VLAN associated with this entry.
Port The port the client is connected to.
Expires (sec) The time in seconds until the lease expires.
To Next Page
Loading...
Need help?
General
