Allied Telesis AlliedWare Plus AT-x230-10GP - Show Memory Shared

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 211
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
MEMORY SHARED
show memory shared
Overview This command displays shared memory allocation information. The output is
useful for diagnostic purposes by Allied Telesis authorized service personnel.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show memory shared
Mode User Exec and Privileged Exec
Example To display information about the shared memory allocation used on the device,
use the command:
awplus# show memory shared
Output Figure 5-12: Example output from the show memory shared command
Related
Commands
show memory allocations
show memory history
show memory
awplus#show memory shared
Shared Memory Status
--------------------------
Segment allocated = 39
Pages allocated = 39
Pages resident = 11
Shared Memory Limits
--------------------------
Maximum number of segments = 4096
Maximum segment size (kbytes) = 32768
Maximum total shared memory (pages) = 2097152
Minimum segment size (bytes) = 1