C613-50055-01 REV A Command Reference for x230 Series Edge Switches 957
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AAA COMMANDS
AAA
AUTHENTICATION AUTH-MAC
aaa authentication auth-mac
Overview This command enables MAC-based Port Authentication globally and allows you to
specify an authentication method list. It is automatically applied to every interface
running MAC-based Port Authentication.
Use the no variant of this command to globally disable MAC-based Port
Authentication.
Syntax
aaa authentication auth-mac default group {<group-name>|radius}
no aaa authentication auth-mac default
Default MAC-based Port Authentication is disabled by default.
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages are sent:
• group radius : use all RADIUS servers configured by radius-server host
command
• group <group-name> : use the specified RADIUS server group configured
with the aaa group server command
All configured RADIUS Servers are automatically members of the server group
radius. If a server is added to a named group < group-name >, it also remains a
member of the group radius.
Examples To enable MAC-based Port Authentication globally for all RADIUS servers, and use
all available RADIUS servers, use the commands:
awplus# configure terminal
awplus(config)# aaa authentication auth-mac default group
radius
To disable MAC-based Port Authentication, use the commands:
awplus# configure terminal
awplus(config)# no aaa authentication auth-mac default
Related
Commands
aaa accounting auth-mac default
auth-mac enable
Parameter Description
<group-name> Server group name.
radius Use all RADIUS servers.
To Next Page
Loading...
