902 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER PAGE WELCOME-MESSAGE
auth-web-server page welcome-message
Overview This command sets the welcome message on the web-authentication page.
Use the no variant of this command to remove the welcome message.
Syntax
auth-web-server page welcome-message text <welcome-message>
no auth-web-server page welcome-message
Default No welcome message is set by default.
Mode Global Configuration
Examples To set the welcome message on the web-authentication page, use the commands:
awplus# configure terminal
awplus(config)# auth-web-server page welcome-message text Your
welcome message
To remove the welcome message on the web-authentication page, use the
commands:
awplus# configure terminal
awplus(config)# no auth-web-server page welcome-message
Validation
Commands
show auth-web-server page
Parameter Description
<welcome-message> Text string of the welcome message
To Next Page
Loading...
