C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1313
AlliedWare Plusâ„¢ Operating System - Version 5.4.5-0.x
NTP COMMANDS
SHOW
NTP ASSOCIATIONS
show ntp associations
Overview Use this command to display the status of NTP associations. Use the detail option
for displaying detailed information about the associations.
Syntax
show ntp associations [detail]
Mode User Exec and Privileged Exec
Example See the sample output of the show ntp associations and show ntp associations
detail commands displaying the status of NTP associations.
Table 37-2: Example output from the show ntp associations command
awplus#show ntp associations
address ref clock st when poll reach delay offset disp
~192.0.2.23 INIT 16 - 512 000 0.0 0.0 0.0
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
awplus#
Table 37-3: Example output from the show ntp associations detail command
awplus#show ntp associations detail
192.0.2.23 configured, sane, valid, leap_sub, stratum 16
ref ID INIT, time 00000000.00000000 (06:28:16.000 UTC Thu Feb 7 2036)
our mode client, peer mode unspec, our poll intvl 512, peer poll intvl 1024
root delay 0.00 msec, root disp 0.00, reach 000,
delay 0.00 msec, offset 0.0000 msec, dispersion 0.00
precision 2**-19,
org time 00000000.00000000 (06:28:16.000 UTC Thu Feb 7 2036)
rcv time 00000000.00000000 (06:28:16.000 UTC Thu Feb 7 2036)
xmt time cf11f2a4.cedde5e4 (00:39:00.808 UTC Tue Feb 2 2010)
filtdelay = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filtoffset = 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filterror = 16000.00 16000.00 16000.00 16000.00 16000.00 16000.00 16000.0
0 16000.00
Table 37-4: Parameters in the output from the show ntp associations command
Parameter Description
address Peer IP address
ref clock IP address for reference clock
st Stratum. The number of hops between the server and the accurate
time source.
poll Time between NTP requests from the device to the server.
reach Shows whether or not the NTP server responded to the last request.