Allied Telesis AlliedWare Plus AT-x230-10GP - Clear Line Vty

68 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
USER ACCESS COMMANDS
CLEAR
LINE VTY
clear line vty
Overview This command resets a VTY line. If a session exists on the line then it is closed.
Syntax
clear line vty <0-32>
Mode Privileged Exec
Example To reset the first vty line, use the command:
awplus# clear line vty 1
Related
Commands
privilege level
line
show telnet
show users
Parameter Description
<0-32> Line number