Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1343
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SNMP COMMANDS
SHOW
SNMP-SERVER USER
show snmp-server user
Overview This command displays the SNMP server users and is used with SNMP version 3
only.
Syntax
show snmp-server user
Mode Privileged Exec
Example To display the SNMP server users configured on the device, use the command:
awplus# show snmp-server user
Output Figure 40-7: Example output from the show snmp-server user command
Related
Commands
show snmp-server
snmp-server user
Name Group name Auth Privacy
------- ------------- ------- ----------
freddy guireadgroup none none

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English