C613-50055-01 REV A Command Reference for x230 Series Edge Switches 229
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
TECH-SUPPORT
By default the output is saved to the file ‘tech-support.txt.gz’ in the current
directory. If this file already exists in the current directory then a new file is
generated with the time stamp appended to the file name, for example
‘tech-support20080109.txt.gz’, so the last saved file is retained.
Usage This command is useful for collecting a large amount of information about all
protocols or specific protocols on your device so that it can then be analyzed for
troubleshooting purposes. The output of this command can be provided to
technical support staff when reporting a problem.
Mode Privileged Exec
Examples show tech-support
awplus# show tech-support
To Next Page
Loading...
