30
1040 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
TACACS+
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the device to use TACACS+ servers. For more information about TACACS+, see the
TACACS+ Feature Overview and Configuration Guide.
Command List •“show tacacs+” on page 1041
•“tacacs-server host” on page 1042
•“tacacs-server key” on page 1044
•“tacacs-server timeout” on page 1045
To Next Page
Loading...
