C613-50055-01 REV A Command Reference for x230 Series Edge Switches 215
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SYSTEM CONFIGURATION AND MONITORING COMMANDS
SHOW
ROUTER-ID
show router-id
Overview Use this command to show the Router ID of the current system.
Syntax
show router-id
Mode User Exec and Privileged Exec
Example To display the Router ID of the current system, use the command:
awplus# show router-id
Output Figure 5-15: Example output from the show router-id command
awplus>show router-id
Router ID: 10.55.0.2 (automatic)
To Next Page
Loading...
