25
813 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
802.1X Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
802.1X port access control.
Command List •“debug dot1x” on page 814
•“dot1x control-direction” on page 815
•“dot1x eap” on page 816
•“dot1x eapol-version” on page 817
•“dot1x initialize interface” on page 818
•“dot1x initialize supplicant” on page 819
•“dot1x keytransmit” on page 820
•“dot1x max-auth-fail” on page 821
•“dot1x max-reauth-req” on page 823
•“dot1x port-control” on page 824
•“dot1x timeout tx-period” on page 826
•“show debugging dot1x” on page 827
•“show dot1x” on page 828
•“show dot1x diagnostics” on page 831
•“show dot1x interface” on page 833
•“show dot1x sessionstatistics” on page 838
•“show dot1x statistics interface” on page 839
•“show dot1x supplicant” on page 840
•“show dot1x supplicant interface” on page 842
•“undebug dot1x” on page 845
To Next Page
Loading...
Need help?
General
