Allied Telesis AlliedWare Plus AT-x230-10GP - Show Running-Config Ssh

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1067
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
SECURE SHELL (SSH) COMMANDS
SHOW
RUNNING-CONFIG SSH
show running-config ssh
Overview This command displays the current running configuration of Secure Shell (SSH).
Syntax
show running-config ssh
Mode Privileged Exec and Global Configuration
Example To display the current configuration of SSH, use the command:
awplus# show running-config ssh
Output Figure 31-5: Example output from the show running-config ssh command
!
ssh server session-timeout 600
ssh server login-timeout 30
ssh server allow-users manager 192.168.1.*
ssh server allow-users john
ssh server deny-user john*.a-company.com
ssh server
Table 31-5: Parameters in the output of the show running-config ssh command
Parameter Description
ssh server SSH server is enabled.
ssh server v2 SSH server is enabled and only support SSHv2.
ssh server<port> SSH server is enabled and listening on the
specified TCP port.
no ssh server scp SCP service is disabled.
no ssh server sftp SFTP service is disabled.
ssh server
session-timeout
Configure the server session timeout.
ssh server login-timeout Configure the server login timeout.
ssh server max-startups Configure the maximum number of concurrent
sessions waiting authentication.
no ssh server
authentication password
Password authentication is disabled.
no ssh server
authentication publickey
Public key authentication is disabled.