C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1125
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SHOW
IP DHCP SNOOPING ACL
show ip dhcp snooping acl
Overview Use this command to display information about the Access Control Lists (ACL) that
are using the DHCP snooping database.
Syntax
show ip dhcp snooping acl
show ip dhcp snooping acl [detail|hardware] [interface
[<interface-list>]]
Mode User Exec and Privileged Exec
Example To display DHCP snooping ACL information, use the command:
awplus# show ip dhcp snooping acl
Parameter Description
detail Detailed DHCP Snooping ACL information.
hardware DHCP Snooping hardware ACL information.
interface ACL Interface information.
<interface-list> The interfaces to display information about.
Table 32-11: Example output from the show ip dhcp snooping acl command
awplus#show ip dhcp snooping acl
DHCP Snooping Based Filters Summary:
Maximum Template Attached
Interface Bindings Bindings Filters Hardware Filters
----------------------------------------------------------------
port1.0.1 1 520 0 0
port1.0.2 1 3 2 6
port1.0.3 1 2 4 8
port1.0.4 1 2 7 14
port1.0.5 0 2 6 12
port1.0.6 0 1 0 0
port1.0.7 0 1 0 0
port1.0.8 0 1 0 0
port1.0.9 0 1 0 0
port1.0.10 0 1 0 0
port1.0.11 0 1 0 0
port1.0.12 0 1 0 0
(port2.0.1 ) 0 520 0 0
(port2.0.2 ) 0 1 0 0
To Next Page
Loading...
Need help?
General
