C613-50055-01 REV A Command Reference for x230 Series Edge Switches 527
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
POWER OVER ETHERNET COMMANDS
SHOW
POWER-INLINE INTERFACE DETAIL
show power-inline interface detail
Overview This command displays detailed information for specified Power over Ethernet
(PoE) port(s) on the Power Sourcing Equipment (PSE).
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show power-inline interface [<port-list>] detail
Mode User Exec and Privileged Exec
Usage To show detailed PoE information for all ports on the PSE, do not specify any ports.
The power allocated to each port is listed in the Power allocated row, and is
limited by the maximum power per Powered Device (PD) class, or a user
configured power limit.
Example To display detailed PoE port specific information for the port range 1.0.1 to
1.0.2, use the following command:
awplus# show power-inline interface port1.0.1-port1.0.2 detail
Parameter Description
<port-list> Enter the PoE port(s) to display the PoE port specific information.
To Next Page
Loading...
Need help?
General
