Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1123
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
DHCP SNOOPING COMMANDS
SHOW
DEBUGGING IP DHCP SNOOPING
show debugging ip dhcp snooping
Overview Use this command to display the DHCP snooping debugging configuration.
Syntax
show debugging ip dhcp snooping
Mode User Exec and Privileged Exec
Example To display the DHCP snooping debugging configuration, use the command:
awplus# show debugging ip dhcp snooping
Related
Commands
debug ip dhcp snooping
show log
Table 32-9: Example output from the show debugging ip dhcp snooping
command
awplus# show debugging ip dhcp snooping
DHCP snooping debugging status:
DHCP snooping debugging is off
DHCP snooping all debugging is off
DHCP snooping acl debugging is off
DHCP snooping binding DB debugging is off
DHCP snooping packet debugging is off
DHCP snooping detailed packet debugging is off

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English