1030 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
SHOW
CRYPTO PKI TRUSTPOINTS
show crypto pki trustpoints
Overview Use this command to display trustpoint information.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show crypto pki trustpoints
Mode User Exec and Privileged Exec
Example The following command displays trustpoint information.
awplus# show crypto pki trustpoint
Output
Related
Commands
crypto pki enroll local
Table 29-7: Example output from the show crypto pki trustpoints command
Trustpoint local:
Subject Name:
CN = AlliedwarePlusCA
o = Allied-Telesis
Serial Number:0C
Table 29-8: Parameters in the output of the show crypto pki trustpoints
command
Parameter Description
Subject Name CA certificate subject.
Serial Number Current serial number of CA.
To Next Page
Loading...
