Allied Telesis AlliedWare Plus AT-x230-10GP - Chapter 38 Dynamic Host Configuration Protocol (DHCP) Commands; Introduction

38
1316 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
Dynamic Host
Configuration
Protocol (DHCP)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the DHCP Feature Overview and Configuration Guide.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Command List •“ip address dhcp” on page 1317
•“show counter dhcp-client” on page 1319
•“show dhcp lease” on page 1320