Allied Telesis AlliedWare Plus AT-x230-10GP - Show Running-Config Key Chain

154 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG KEY CHAIN
show running-config key chain
Overview Use this command to show the running system key-chain related configuration.
Syntax
show running-config key chain
Mode Privileged Exec and Global Configuration
Example To display the running system key-chain related configuration, use the command:
awplus# show running-config key chain
Output Figure 3-17: Example output from the show running-config key chain
command
Related
Commands
copy running-config
show running-config
!
key chain 12
key 2
key-string 234
!
key chain 123
key 3
key-string 345
!