584 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
IPV6 COMMANDS
SHOW
IPV6 FORWARDING
show ipv6 forwarding
Overview Use this command to display IPv6 forwarding status.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the “Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide.
Syntax
show ipv6 forwarding
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 forwarding
Output Figure 16-1: Example output from the show ipv6 forwarding command
ipv6 forwarding is on
To Next Page
Loading...
