900 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER PAGE SUCCESS-MESSAGE
auth-web-server page success-message
Overview This command sets the success message on the web-authentication page.
Use the no variant of this command to remove the success message.
Syntax
auth-web-server page success-message text <success-message>
no auth-web-server page success-message
Default No success message is set by default.
Mode Global Configuration
Examples To set the success message on the web-authentication page, use the commands:
awplus# configure terminal
awplus(config)# auth-web-server page success-message text Your
success message
To unset the success message on the web-authentication page, use the
commands:
awplus# configure terminal
awplus(config)# no auth-web-server page success-message
Validation
Commands
show auth-web-server page
Parameter Description
<success-message> Text string of the success message
To Next Page
Loading...
