C613-50055-01 REV A Command Reference for x230 Series Edge Switches 991
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
RADIUS COMMANDS
SHOW
DEBUGGING RADIUS
show debugging radius
Overview This command displays the current debugging status for the RADIUS servers.
Syntax
show debugging radius
Mode User Exec and Privileged Exec
Example To display the current debugging status of RADIUS servers, use the command:
awplus# show debugging radius
Output Figure 28-1: Example output from the show debugging radiuscommand
RADIUS debugging status:
RADIUS event debugging is off
RADIUS packet debugging is off
To Next Page
Loading...
